Air-cooled hot oil pumps for continuous duty up to 350°C, built for thermic fluid heaters and process plant.
Best Seller
Balanced design that handles higher pressure with lower face wear.
Simple, rugged and cost-effective for general low-pressure duty.
Conical spring is non-clogging and direction-independent.
Compact axial length — ideal where space in the stuffing box is limited.
Best Seller
Even face load at high speed & pressure for longer seal life.
Reliable multi-spring loading for medium-duty chemical service.
Springs kept out of the product — perfect for sticky or crystallising fluids.
Springs sealed in a capsule to prevent clogging and corrosion.
Two seal faces with barrier fluid for hazardous & toxic media.
Drop-in replacement for Dura-type seals used on ANSI process pumps.
Best Seller
Factory pre-set — fit in minutes without measurement errors.
Double-seal cartridge with barrier ports for zero emission.
Heavy-duty cartridge for boiler feed and high-head services.
Top-entry seal for mixers and low-pressure agitated vessels.
Best Seller
Pressurised double seal with thermosyphon support for reactors.
Gas-lubricated seal — no barrier fluid, no product contamination.
Robust double seal engineered for high-pressure reactor duty.
Best Seller
Fully PTFE-wetted seal for strong acids and aggressive chemicals.
Replace only the worn face — lower maintenance cost over time.
Tolerates shaft misalignment — great for water and utility pumps.
Welded metal bellow for extreme heat and cryogenic service.
Best Seller
PFA-lined centrifugal pump for the most aggressive acids & solvents.
FEP-lined pump — excellent chemical resistance at an economical price.
Rigid PVDF lining for abrasive-corrosive and high-purity services.
Best Seller
Lightweight, corrosion-proof and budget-friendly chemical pump.
Service the pump without disturbing suction & delivery piping.
ISO/ANSI-style process pump in SS 316 / CI for continuous duty.
High-efficiency closed impeller for clean liquids at high head.
Best Seller
Seal-less mag-drive design — zero leakage for toxic & costly fluids.
Best Seller
Standard and custom O-rings in the right compound for your fluid and temperature.
FEP / PFA jacket over an elastic core for aggressive chemicals.
Best Seller
Non-asbestos and rubber gaskets cut to any flange standard.
Chemically inert gaskets for acid, alkali and solvent lines.
Metal-and-filler windings for high pressure and high temperature joints.
Replacement sleeves, glands and seal housings machined to fit your pump.
Bushes, flanges, rings and custom parts turned from stainless steel.
PTFE/PFA lined ball, plug, butterfly & check valves for corrosive lines.
Keeps suction flooded so your pump starts every time.
Barrier-fluid system with cooling coil for double mechanical seals.
Transfer steam, water, oil or air into rotating rolls & drums.
Best Seller
Industrial rubber sheeting in all grades, supplied as sheets or continuous rolls.
Single and double lip oil seals for rotating shafts, in standard and custom sizes.
Punched and moulded washers cut to any size, in the grade your duty needs.
Best Seller
Compression and transfer moulded components produced to your drawing or sample.
Flexible hoses and expansion joints that absorb movement, vibration and misalignment.
Protective bellows and boots that keep dust, water and grit out of moving parts.
Anti-vibration bushes and mountings, bonded to metal where the duty calls for it.
Any rubber part, any grade — made to your drawing, sample or application.
Best Seller
Air-cooled hot oil pump engineered for continuous duty up to 350°C.
Circulation pump for closed hot oil loops, built for low maintenance and long life.
Seals, shafts, bearings and wear parts to keep hot oil pumps running.
Best Seller
Powered on both strokes, for heavy duty applications needing controlled push and pull.
Powered on one stroke with spring or gravity return — simple and dependable.
Cylinders built to your drawing, mounting and stroke — whatever the machine needs.
Complete seal kits to reseal a cylinder and stop leaks, matched to bore and rod.
Best Seller
Hoses crimped to length with the fittings you need, ready to install.
Adaptors, ferrules and end fittings across the common types and sizes.
Hose for demanding circuits where pressure and duty cycle are unforgiving.
Best Seller
Virgin and filled PTFE sheet for gaskets, lining and machining stock.
Extruded and moulded PTFE rod for turning bushes, seals and components.
Tube and bush stock for low-friction, chemically inert running surfaces.
PTFE gaskets cut to your flange or equipment, for aggressive media.
Machined PTFE sealing rings, including spring-energised and filled grades.
Liners that put a chemically inert barrier between the media and the metal.
Best Seller
Customized PTFE components turned and milled as per drawing.
Thread sealing tape for pipe threads — the everyday PTFE consumable.
Best Seller
High quality gearboxes for industrial drives, with support and after-sales service.
Speed reducers selected for your ratio, torque and mounting.
Genuine spares — gears, shafts, bearings and seals to your gearbox model.
Send a photo of your old part or pump nameplate — our engineers will suggest the exact match with price, free of charge.
